How to debug the LED full-color display
How to debug the LED display? First of all, we must install the control card software corresponding to the LED display control card. Then set the import display parameters.
2020/03/27
How to debug the LED display? First of all, we must install the control card software corresponding to the LED display control card. Then set the import display parameters.
01.What are the possible reasons for not loading?
Failure to load can be caused by the following reasons, please compare the actions with you according to the listed items:
A. Make sure the control system hardware is powered on correctly.(+5V)
B. Check and confirm that the serial port line used to connect the controller is a straight line, not a cross wire.
C. Check and confirm that the serial port connection cable is intact and there is no loosening or falling off at both ends.
D. Select the correct product model, correct transmission mode, correct serial port number, correct baud rate according to the LED display control software and the control card of your own choice, and correctly set the address bit and baud rate on the control system hardware according to the DIP switch diagram provided in the software.
Key words：
Previous:
The next one:
LED advertising modules and lightbox light sources in the lighting industry
Contact
Add: 6F, Building 3, Jinxi Datangtou Industrial Park, Waihai Rd. Jianghai District, Jiangmen City, Guangdong Province,China
Web: www.rayfond.cn
Sign up for exclusive offers and updates!
Connnect with us!
